Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Filter by:
Sort by:
This wasn't a cheap unit, so I'd like to get it looked at before thinking of a replacement. Would I call an electrician for this?
Hi There, i have currently have two showers and recently the one upstairs has stopped providing cold water and is luke warm or goes really hot but when i turn it to cold it stops providing water pressure (could this be related to the Thermostatic mixing valve?) The 2nd issue when i use the downstairs shower it is really hot and stays hot the same tempature no mater which way i turn it hot or cold? any idea what the issue can be? Please note i have a baxi boiler and a have a main indirect cyclinder 250 litre.
My neighbour is being a problem we want to replace a roof tiles on our house. But how would it be possible if he doesn’t allow us access to get scaffolding up on his side. 3 sides of the roof can be replaced but the side which is on the neighbours side won’t be reached as cannot get any scaffolding up. Any idea what can be done.
I want to completely remove an old electric bar heater from my bathroom wall for tiling and don't want to reconnect anything, is it safe to cut the wires, tape them and then push them back through the wall?
Recently I have purchased a new plaster ceiling rose (approx. 90cm in diameter) and I will be having a room re-plastered and decorated in the coming weeks. The decorator I have hired has not had much experience with installing ceiling roses and certainly not one as large/heavy as this one. If anyone has any experience with this, could they please recommend the best options to install it safely and successfully. Many Thanks, P
Is it true that the smooth half of any fencing put up by my neighbour must face towards my property?
We have a fitted kitchen with standard height worktop. We need to replace a dishwasher from a Fisher Paykell dish drawer type to a Miele integrated one. So we need to get a new front door piece for the integrated machine. We have had difficulty sourcing a door from the kitchen supplier so were looking at a Miele stainless steel one 60cm wide X 72cm but our kitchen doors are 77cm. To me this looks as if the dishwasher front will look strange as the lower edge of it will sit higher than the lower edge of the doors. Is there a way round this?
How much to core a standard 4" extractor fan hole through brickwork in a bathroom please? No other install needed. Just the hole cored.
Been advised dashing is good so it can be dashed over, is this safe?
I am having my roof done and we are an end terrace, therefore connected to another terrace house. My roofer has taken the mortar that was connecting the two roofs off to fix our problem and has found problems with weatherproofing with next doors roof. Should he have informed next door first of any potential problems before starting the work?
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year