Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Checking your question…
Filter by:
Sort by:
Is it worth opting for a second hand kitchen? What are the pros and cons?
Apart from having two doors with locks, are there any special considerations for a Jack and Jill bathroom?
What's the best thing to clean uPVC conservatory frames with, without damaging them? I need to remove yellowing and mildew. What do manufacturers recommend?
The cord on our bathroom light pull has snapped. How do I safely fix this without an electrician please?
I live in a period house in Sussex which has a gambrel roof that needs replacing. Do I need a specialist roofer to do this and how much is it likely to cost?
Hi, I was wondering if it's doable, and how much it would cost to reduce the size of a second-hand P-shaped conservatory on one side by only 1 foot (by possibly taking out one window panel width and uPVC/poly-carb roof panels to match and adjusting it accordingly to match up with the p side. It's a complicated shape as it is a slightly L-shaped as it wraps around the side of my driveway. But it only needs reducing by a foot on that side to fit, and it was suggested as a possible solution?. But I would value your professional opinion as to whether or not it would be worth the hassle and/or expense? Also the cost of a steel base rather than concrete. It's a large area, 11' x 10 & 14 x 10. It's the 14 x 10 that wraps around down the side, but from the house wall it measures 8' 7", that would need reducing to 7' 5" as the width of my driveway is max 7' 10" but I have 5" soakaway on that side. Plus it would be connecting my neighbours boundary wall! Thank you in advance Y
How much is it usually to hardwire an electric HOB? If any cutting would be required to the counter top(cut out) would you also complete this aswel if it was 1/2 mil out?
We're replacing our old copper hot water cylinder with a modern unvented unit. The old copper tank is coming out so is it worth selling for scrap and if so what's a rough price?
We are renovating a downstairs room that has a lino floor. When we took the skirting boards off and lifted the edge of the lino we found that the concrete didn’t go all the way to the walls ( 1 inch gap all the way round) and the gaps appear to be filled with loose material. When our radiator was fitted the concrete on the floor broke and we found it was only about 1cm thick. Do we need to get the whole floor re-done before replacing skirting and getting carpets fitted or is this a quick fix for any cracks or holes we find?
On starting there is a red light with a single flashing light indicating a lack of water supply to my dish-washer. Having checked the water inlet to the filter which is clear, what further cause could give rise to fault.
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Checking your question…
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year