Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Filter by:
Sort by:
I already have paving flags and want to have a patio laid on my lawn,what should I expect to pay for labour and materials? The area is 18msq. Thanks.
The radiators weren't heating up properly. I bled the radiators (which didn't actually have any air in them, so were ok). I added some pressure (too much... so bled a radiator again till it was 1.4 bar (cold). Boiler played up so had to turn it off and on a few times. Heating was then able to come on (still only little heat so may possibly be sludge or something in radiators). Key thing, however, is that then, when I turned the hot tap on, nothing came out at all.... nor since. Pls can someone advise me! No hot water in during this cold snap is not fun. Particularly at the weekend! Thanks.
I want to replace our old shower (exposed valve type) with a bar valve shower. the 15mm pipe connections are 160mm apart and all bar valves are standard 150. I know offset connectors might work but on forums, people say its difficult to get the connectors to 150 AND level. its a tiled wall so don't want to remove tiles, but short of fitting the same type of shower.......any advice?
What's the best drain unblocker? I frequently get a blocked kitchen sink. I want a stong unblocker to try and fully clear out any blockages before I call in a professional.
How can I go about requesting a building inspection? What is involved in this?
Hi, I've had a damp survey done on a house I'm in the process of buying and it has recommended that the ground is lowered at the back of the house to prevent water splashing from the patio tiles onto the walls (and hopefully exposing the air bricks so that the sub floor is ventilated). I think the job would involve slicing off some of the patio tiles, digging down to the appropriate depth, laying down a membrane and then filling in with gravel. I'm not sure which is the most appropriate trade to do this - would it be something a general handyman could do?
Can you install solar panels in a gated front garden?
Can heating engineers offer independent advice on new boilers? Or are they tied to certain boiler brands? Many in our area seem to have brand logos on their vans and websites.
What kind if price would I be looking at to lay porcelain paving slabs in an area of 16 x 16 feet exclusing the price of the slabs? Also what would the cost to have a concrete slab layed that is 10 x 13 feet?
I’ve started prepping the doors but not sure if I’ve done enough. Will eggshell stick to gloss or does it need primer or sanding first?
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year