Access issues with wall-mounted taps

I like the idea of wall mounted taps for my bath, but they look like they'd be hard to access if there's a leak or other issue. How do they work in terms of maintenance?

Asked by Bill on 16th Nov 2022
Expert Trade Answers
"as soon as you build plumbing valves and fixtures in you are creating more work when it comes to maintenance."
Answered on 27th Feb 2023 - Member since Feb 2019 - report
"Once installed properly there should be no need to access the connections"
Answered on 25th Dec 2022 - Member since Nov 2019 - report
"Well the first thing that has to be done is the installation of pipework has to be made and concealed behind wall to be connected to your taps if there is no pipework you cannot have wall mounted taps depending on positioning of your bath this could be quite an expensive job for you as the removal of your bath will have to be done extra pipework fitted from existing pipework that you already have there"
Answered on 16th Nov 2022 - Member since Aug 2022 - report
"It depend where the pipework that feeds them comes from"
Answered on 17th Jan 2023 - Member since Oct 2022 - report
"Hi Bill
It depends on the wall fabric and the quality of the plumbing connections made. But unless you have rear access you will end up having to break into the wall to fix leaking pipes. The actual tap mechanism should be accessible from the front anyway. Normally connections are made and tested and left for a day to check for weeping before covering over the pipe work. I have done it behind decorative painted mdf panelling. I can share a pic if you need it."
Answered on 16th Nov 2022 - Member since Sep 2022 - report
"Obviously this would involve concealed pipework, if possible try and install the taps install the pipework in a stud wall which is accesible via adjacent wall if ever need, you could simply cut out a small section of plaster to access the taps/pipework from the rear, this would also reduce installation costs and allow you to install taps after bath as been install and wall finishes are complete"
Answered on 16th Nov 2022 - Member since Sep 2022 - report
"If possible, you could put an access panel behind the wall for maintenance. the only parts that would need maintenance are the cartridges which can usually be accessed externally without going behind the walls."
Answered on 8th Jan 2024 - Member since Dec 2023 - report
Find Tradespeople, compare up to 3 quotes!
It's FREE and there are no obligations
Ask a Trade
Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.
Ask your question
Ask a Trade

Are you looking for advice on a DIY project or have a question for our tradespeople?

We'll email your question to tradespeople who are skilled in your chosen category.

Your question will be made public - please do not include any personal details.

{{ first(ask.errors)[0] }}

By continuing you agree to the Community Guidelines.

Report Content

{{ first(reportForm.errors) }}

Thank you

Your report has been created and will be investigated shortly.

Ready to get a price for your home improvement project?
Get started

Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year