Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Filter by:
Sort by:
Would it be possible to remove some old silicone around the edges of my skirting boards, and then replace it with grout? I had the a slate floor laid down last year, but unfortunately, the sealant has started to peal away from the skirting board. I need it removing completely in order to repaint the skirting board and tidy up the edges with grout. The grout that was used when laying down the floor was London grey. I can supply the grout if that helps. I require this silicone to be removed, as it does not look right. Thanks, Shane
What's the difference between a concrete and cement driveway?
Hi, We are currently trying to install built-in wardrobes in our alcove; the plinth is built, and one side is in. When we go to put the left part it doesn't fit. We looked, and it looks like when measuring the far side of the edge, of left side is wider than the near side. This section of wall is only about a foot deep, so what is the best way to trim it back to allow the wardrobe to fit?
I would am moving house in August and the house that we are moving to needs a combination boiler fitted. I have been told that the pipework is fine and is the right size in shape/width. I would like to know how much it would cost to have one fitted for a small 3 bed semi ?
What flooring creates the softest underfoot after carpet?
Recently had a full heating system put in, oil boiler, vented system, rads upstairs, UFH downstairs. System is losing pressure, plumbers have come back once and vented it and reset everything, a week later no pressure again. I have topped it up from filling loop, bled all rads. UFH is working fine. Can’t see any leaks, when I was filling up PRV was releasing air, but now I am stuck. Rads cold, slightly luke warm hot water, plumbers say air just needs to work its way through system. Any help to either push air quickly or get some heat into rads would be greatly appreciated
How much does it cost to run the central heating for a given hour in the UK? Does it depend on where I live or the supplier that I have? If so, how can I find out the cost per hour for me?
Is it OK to use a handyman for small and simple plumbing jobs rather than a plumber?
I have a Blocked Toilet, how do I unblock it without creating a bigger problem with the water in the toilet the level of which is not lowing? and how much would be a fair price to get a plumber to come and unblock it?
What is the quietest shower pump available you would recommend
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year