New patio partly going over exsisting path.

I have had wheelchair accessable paths put in my garden but would now like to have a patio area that will go over one of the exsisting paths and onto the current grass area. Its it better to concrete onto the grass so its all level or pave over the path and then onto where the grass is?

On a limited budget so looking for best options as dont want the new patio sinking below the path or causing issues.

Removing the path is not an option and must be incorperated.

Asked by Shane on 18th Mar 2024
Expert Trade Answers
"I would recommend taking the grass up and televveling I can assist you if you want please message me"
Answered on 18th Mar 2024 - Member since Jan 2024 - report
"Is the path block paving, slabs, gravel etc.
If its block paving, you can just simply lift a few blocks and lay the patio on the edge of the blocks.
Slabs you can just match up and have the path then merge into the patio. And if it's gravel, you will obviously have to remove the part that goes onto the grass and lay the patio. Then your path will meet the edge of your new patio area. It's hard to say without photos."
Answered on 18th Mar 2024 - Member since Feb 2024 - report
"Depending wot your putting down maybe not good idea going over concrete path due to drainage and things would probably better lifting path and join on properly"
Answered on 18th Mar 2024 - Member since Jan 2024 - report
"Hi dear you don’t need to concrete, I suggest you do a hard base compact with hardcore and then lay the stones with mortar sand and ciment"
Answered on 18th Mar 2024 - Member since Jun 2023 - report
"Definitely knit the 2 together with new concrete and rebar dowels and pave over the top"
Answered on 18th Mar 2024 - Member since Sep 2020 - report
"To create a patio that doesn't sink you are going to have to put a base layer down underneath the paving/slabbing. Depending on what kind of paving you are using will depend on what you can do next.
If it's block paving and you wish to go over the path, then make sure your edging is hi enough to allow you a few mm sand over the top of the unremovable path. Or butt up to the edge of the path for a flush finish.
If slab then you will have to either butt up to either side of the path flush or stick slabs over the path (the path is not able to be saved in this instance, as stuck slab is a permanent finish)"
Answered on 19th Mar 2024 - Member since Mar 2024 - report
"You can concrete over one of the paths and just raise the bed of concrete to keep everything level. The patio area on the grass, you would have to dig out a sufficient amount of earth and fill with MOT/ hard-core for a solid base for the patio to sit on."
Answered on 19th Mar 2024 - Member since Feb 2024 - report
"If you’re paving over the path it will be ok but where the grass is would need to be dug out and type 1 laying then it will need compacting otherwise over time it will sink. I’m available at the moment at weekends if you would like the work done. My names Dean"
Answered on 1st Apr 2024 - Member since Oct 2022 - report
"Grass should be dug down and mot hard-core laid and compacted then a dry concrete mix or wet mix should be used depending on the materials of the patio."
Answered on 3rd Apr 2024 - Member since Jan 2024 - report
Find Tradespeople, compare up to 3 quotes!
It's FREE and there are no obligations
Ask a Trade
Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.
Ask your question
Ask a Trade

Are you looking for advice on a DIY project or have a question for our tradespeople?

We'll email your question to tradespeople who are skilled in your chosen category.

Your question will be made public - please do not include any personal details.

{{ first(ask.errors)[0] }}

By continuing you agree to the Community Guidelines.

Report Content

{{ first(reportForm.errors) }}

Thank you

Your report has been created and will be investigated shortly.

Ready to get a price for your home improvement project?
Get started

Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year