Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Filter by:
Sort by:
Is a brick jointer just for aesthetic purposes or does it have a practical purpose?
Hi - whilst sanding and treating outside window and door frames, a lot of the sealing substance dislodged from round the edges. I need this resealed. Would a joiner do this?
Hi! How do I know what the open time is for a given product? Will it always say on the product itself?
I have a grey marble effect tv backboard on top of my media wall. I'd like to change it to matt black. Is it possible to paint a laminated mdf tv backboard ? Thanks
I've just cancelled my TV subscriptions and want to use freeview instead. Do I need an aerial to get it?
Hello, We have had damp wall on the party wall after the neighbour has removed the chimney breasts. We have never had this issue before and noticed this after they had started work. After recommendations from the surveyor we have had our side of the chimney stack rendered where necessary and chimney pots fitted last year, however despite this the wall remains damp. The neighbour hasn't fixed his side and also has no soakers where our roof and their roof join plus the hips that have been placed there are very poorly rendered with holes showing through on our side of the roof. The surveyor told to use a lime based plaster system and no chemical injections as they believe water is coming down from the chimney stack. The house was built in 1929 , and we would like to know what does a lime based plaster system mean, what materials are required and what is involved. We are currently trying to dry out the walls but it's not working. Please can someone help.
If I want to paint the outside of my house, is a ladder enough safety? Should I get a harness and if so, how much might this cost me and where can I buy one? When would scaffolding be necessary? I live in an ordinary sized semi-detached home.
the pressure of boiler looks unstable After i re-pressurize to 1.5 bar, using tap is ok without problem. but when turn on the heating, the pressure rise over 2 and the error code showing water pressure high After i did the bleeding and re-pressurize to 1.3 bar, the heating is ok and pressure not over 2. But after the heating off, the pressure came down to 1 and sometime even lower than 1 need to top up again what will the problem with it and how to fix it
Can you tell me a bit more about benchmark, what is it and how could I avail of it? Thanks!
Can one rewire a property without pulling the floorboards up?
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year