Cooker hood fitted

Best Answer

"It depends is it to be vented out side and is there an electric out let at the position of hood is it needing new wiring /new hole cut through the wall need all information before I can put a price on it."

"It depends on the type of cooker hood you require, if it's only on a recirculation filter mode it should be straight forward and cost a day's labour approximately £150.
However, if you want it vented outside then the cost will depend on whether you have access to an outside wall for venting or require venting between joists to an outside wall. This may require drilling with a diamond core drill bit and may add quite a substantial cost. This could only be determined through a site survey."

"The price for fitting is £40-50, depending on the extractor"

"Hi
The price could be from around £150 - £250 this depends on how it is vented and if there is a power supply already in situ. Hope this helps."

"It depends on the access to power mostly, if there is easy access to power around £100-£150, if getting the power feed is more involved could be an extra £50 to £100.
Many thanks"

"It depends on the job to be done. If you have the extractor and all due installations is one price. If needs all done is another. But is roughly £120-150 to get it all done plus the "hood" if you haven't bought it yet."

"Price would vary depending on what your looking for, is it a fit only price or a supply and fit price. It will also vary based on size required. Is there space for a cooker hood, would it require moving/removing cabinets. Will the cooker hood be a circulatory type or will it require extracting to the outside?"

"The cooker hood will cost around £100"

"Depends how difficult the electrical point is but electrics plus 100 mm hole for vent and fitting id say £230ish"

"It would cost someone £150-250 for one day to install. The cooker head will cost minimum £20-50 depending on which style and size you go for."

"Cheapest stainless steel hood plus labour would be £250 provided you have power in right place"

"Depends on the width of the cooker hood, the most common is 60cm wide.
Then the style of the hood can differ. They start around £100

To fit it you’d look at about £100.
All in all I’d estimate £250-£500"

"If its a free standing extractor hood it can be fixed to the wall by an electrician and if a supply/spur is nearby then expect to pay around £120.00.
If it needs to be integrated add another £100.00"

"If there’s power there then no more than £100 be more if there’s no power there."