Who should I ask to do the brickwork inspection?

Question

I have changed two courses DPC bricks. It’s a small project, who should I ask to do the brickwork inspection? I think the work may  not be properly done.

Max · Answer

Check for damp course
Check for weep holes 
Check for cavity trays installed correctly
Check that wall ties are installed correctly 
Check that there is installation and is fitted correctly

bazza · Answer

First you expect a decent job  so what is important to you paying some one else  to tell you the work isn't very good or ask the tradesman reasons he has left the work like it is ,?think logic you want the work correct the builder wants paying. Solicitors  won't get the work done .trading standards could get the builder in serous  trouble .but they won't get the work done fi d middle ground get builder back on side and agree the remedial  work you both win at no extra cost to you

Thomas · Answer

A qualified brick layer with at least 30+ years experience and or a quantity surveyor.

Steve · Answer

Bricklayer or if you have subsidence seek the advice of a surveyor

Shakespear · Answer

Structural inspector near you or a building inspector, or council building regulatory authority

John · Answer

Bricklayer or  get a building inspector from your local council to have a look

Ion · Answer

Building regulations control, them should come and inspect if the dpm is correct, and if them use the right engineering bricks for damp course

James · Answer

A bricklayer really they have more experience then most  in that aspect off works

Rubal · Answer

Ask building control or whoever inspect it before or u can hire private building inspectors.

Martin · Answer

If you've had a damp-proof course (DPC) repair or replacement involving two courses of brickwork, and you're unsure whether the work has been carried out correctly, I would recommend arranging an inspection by an experienced building surveyor or a reputable brickwork or damp specialist with proven knowledge of remedial masonry work.
A proper inspection should check that the replacement bricks have been laid correctly, the mortar joints are sound and fully filled, the new damp-proof course has been installed continuously without gaps or bridging, and that the work complies with good building practice. The inspector should also check that external ground levels, render, plaster, cavity debris and any other bridging issues are not allowing moisture to bypass the damp-proof course, as these are common causes of recurring damp problems.
If the work forms part of a larger structural alteration or if there are concerns about the stability of the wall, it may also be worth consulting a building surveyor or structural engineer for an independent opinion. However, for a straightforward DPC and brickwork inspection, an experienced contractor with specialist knowledge is often able to identify whether the work has been completed correctly.
I would also recommend requesting photographs of the work if they were taken during installation, together with details of the materials used and any guarantee provided. This can be extremely helpful if any issues arise later.
My advice is not to ignore your concerns. If a damp-proof course has been installed incorrectly, or if the real cause of the damp hasn't been identified, the problem can continue despite the work having been completed. An independent inspection now could save you significant expense and disruption in the future by ensuring the defect is identified and corrected before further damage occurs.

Who should I ask to do the brickwork inspection?

Follow Us

Cookies

Manage Cookies

Essential cookies

Analytics & Tracking

Advertising