MyJobQuote Logomyjobquote
  • Post a Job
  • Trade Signup
  • Ask a Trade
  • Cost Guides
  • About
  • Login
  • Over 1 million homeowners and over 30,000 tradespeople
    use MyJobQuote nationwide each year

    Post a Job or Sign up as a trade
    Post a Job or Sign up as a trade

    Ask a Tradesman

    Water access during new bathroom installation

    Bathroom Specialists

    Will I have access to hot and cold water when having a new bathroom installed?

    Asked by minesh on 13th Jul 2021
    Share this question
    CjR Pipework Building Services & Maintenance

    "Yes if required we always try our best to please all our customers so a toilet and hot water will be there"

    Answered on 18th Jul 2021 - Member since May 2021 - report
    PS bathrooms

    "Yes, the water will be cut off just for about 1h ones trade person cut off pipe and fit insolation valves, then put water back on"

    Answered on 14th Jul 2021 - Member since Jul 2021 - report
    EFD Construction Company

    ""Yes, you will always have complete access to hot and cold water.
    When I install new bathrooms I always leave access to hot and cold water for the client either by a kitchen sink or another bathroom and at least one working toilet.
    Regards
    Elio
    EFD construction"

    Answered on 19th Jul 2021 - Member since Jul 2021 - report
    Tenaghra

    "Yes you will have access for water in the house. There should be a stop valve on all the water pipes in the bathroom for the fitter to turn off the water to the bathroom only. If there are no stop valves, the fitter will fit some in place at the time of removing the pottery."

    Answered on 14th Jul 2021 - Member since May 2016 - report
    MosaicMe

    "Yes, depending on the pipe network, water can be drained from system and ball valves / shut offs would be installed to allow system to refill and work to continue."

    Answered on 14th Jul 2021 - Member since May 2019 - report
    Redfern Services

    "Yes, you'll always have complete access

    Regards Mick
    Redfern Services"

    Answered on 14th Jul 2021 - Member since Jun 2021 - report
    RCD Interiors

    "Yes you will do if insulation valves are fitted already
    If not it will be of for no longer than 30 minutes"

    Answered on 14th Jul 2021 - Member since Dec 2019 - report
    A Daughtry Plumbing & Heating Ltd

    "When I do bathroom installations, I always leave my customers with access to hot and cold water either by a kitchen sink or another bathroom and at least 1 working toilet. Usually on the first day everything is ripped out so the new bathroom planning can't start"

    Answered on 14th Jul 2021 - Member since Jun 2019 - report
    Saleyka begum

    "A new bathroom needs to have hot and cold water access"

    Answered on 14th Jul 2021 - Member since Jul 2021 - report
    Yourspacebuilders ltd

    "Depends on Design, but yes you should have some access"

    Answered on 14th Jul 2021 - Member since Jan 2020 - report

    Ask a Trade

    Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.

    Ask your Question

    Related questions

    Ready to get a price for your home improvement project?

    get started
    x

    Report Content