Outside hot water tap

Question

How much and how easy is it to install hot water outside to wash my dog

Simon · Answer

It all depends on location of nearest location for hot supply. Also you can buy outside pet showers which link into hot and cold.

Ali · Answer

its depends upon hot water supply? How far or near you like to have new connection. Average speaking with all service vale attached Around £120 plus material subject to survey.

Darren · Answer

If its right outside kitchen sink etc very easy around £150-£180 all in.

Saj · Answer

Fairly straight forward same as putting a garden tap on providing the hot feed is nearby.

Neil · Answer

Hi, I have fitted a gtap for just that recentley,  You may want to bare in mind that a hot tap may be too hot for the dog.
I installed a blending valve, this mixes the hot and cold  together  so you can set a specific temp. As far as labour goes as the previous comment mentioned, it depends on location of the supplies to the tap. roughly an hr to an hr and a half plus parts.

Steven · Answer

All depends on location of (h/c) and placement from where you would like the shower to be placed, if its close and easily accessible, it will be a fairly straight forward job.

Paul · Answer

Hi Sally definitely possibly, if you already have a cold tap outside then a hot one could be put next to it. If you don’t have a cold tap outside then as one of my colleagues mentioned a blending valve may be required so the water is not to hot for your dog.
As for cost I would estimate between £85.00 and £135.00.

Gethyn · Answer

As long as there is a hot feed close to where you want the installation, it is a fairly simple process. As you are wanting to use it to wash your dog I would recommend either a blending valve to control the water temperature or a cold tap as well for the same purpose.

Bruno · Answer

Depends on where the water supply is and also were the tap will be situated 

Cost around £200-£300

Anthony · Answer

Price would be around £170inc vat takes about 2-3 hours if there is a feed opposite where tap is being sited should take about 90 minutes.

Outside hot water tap

Follow Us

Cookies

Manage Cookies

Essential cookies

Analytics & Tracking

Advertising