Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Filter by:
Sort by:
Sat in my house today and my neighbour was having a dry verge system fitted to both gable ends, we are semi detached but the workmen were on my side of the roof without asking. Are they allowed to do this? What do I do if they have caused damage to the tiles or my solar panels?
Hi I am wanting to buy a new electric oven. At the moment I have a electric oven, but when it gets to a high temperature it fuses the house electrics. I only have a normal double socket. Would I need a cooker point installing, and if so, how much roughly for that and to install the oven.
Hi. I need to replace my cylinder door lock. However the screw head on the holding blot is damaged. Any suggestions Thanks.
How much to remove my old gas fire? I'm fitting an electric fire instead.
How much does it cost to have a radiator TRV changed, I’ve bought the part it just seems too awkward and fiddly for me to do with draining pipes and everything. Would a plumber come out for such a small job? And how much would it cost?
I've just bought a reconditioned washing machine. How much would it cost to have someone plumb it in for me? I assume a handyman can do it rather needing a plumber? I have mobility issues, so I can't do it myself but I'm scared of being ripped off.
We have 2 conifers that need reducing in height and width. We also have a Blackberry bush that needs clearing back. What sort of price should i expect it to cost, including the removal of cuttings?
Hi, I recently cleared out under my stairs and found mould growing along the back wall. After clearing it off with mould spray and bleach, I found in the plaster peeling off in the corner. Using a moisture meter I found it to be very damp at least 1.2m high. Will this wall panel need replacing? I also checked moisture content along the skirting board and I think all of it in the cupboard will need replacing. mAlso, is this question better for a plasterer or a builder? Maybe I'm asking the wrong people!
I hired a window fitter to replace my living room window. He's replaced the window but when he was installing it I felt like he used a lot of white silicon before he covered it with a cover. How much sealant would be too much? Also he used white sealant with a brown frame? Am i wrong in thinking he could have colour matched? Thanks.
I have a UPVC door which closes OK in winter (easier) and is very difficult to close in summer. This is the door mechanism not the door itself. I've had a good look around the door and its not warped, etc. seems to fit the door surround correctly, ie. not dropped, etc. To my view it seems to have been badly installed/set-up/adjusted. I cannot seem to figure out how to correct this / adjust it so it closes easily and correctly. I believe this does not require a new door, just adjustment..!! Wanting someone who can adjust this door..!! Please give a quote..!!
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year