Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}

Filter by:
Sort by:
I've seen some really cool wine cellar units installed in the floor with a glass trap door. They're supposed to be easy to install but I can't find any info on floor strength requirements etc. Does anyone know much about these?
Looking to split bedroom in 2 with 7ft partition wall inc simple door. Not sure on costs or choose timber or metal frame.
Do I need a battery storage system when I get solar panels? If so, where does this get fitted and how much space does it need?
Hi, After our Aga is removed, what do we need to do to safely install a gas stove/fireplace? We currently have an Aga in a brick chimney breast in the kitchen. There is a chimney opening that goes up 2 floors, through other people's flats and out the roof chimney. We are on the ground floor in a large Victorian house that has been divided into flats. The fireplace opening is probably the original one. However, we don't know if the current black flue goes all the way through the roof. The Aga is a gas Aga, so gas is already running to that space. Any information you can give will be greatly appreciated. Once we are sure we can go ahead with the plan and will ask for quotes for the installation. Thanks.
Do you remove painter's tape while the paint is drying or after it's fully dried?
I've just bought a property which I'm refurbing. It has a small extension which has been build and one of the 3 walls is a single skin wall. Is this allowed now? Do I need to rebuild it? How do I go about insulating it properly if not? Thanks in advance.
Is it feasible for a DIYer to install a diagonal pattern wooden floor? Or should I hire a professional?
Hi.. best way to remove black scuffs on white paint please?
how much should I expect to pay to have a 30 foot elder tree felled in my rear garden in the west midlands?
We’re looking to fit new skirting, the old skirting we had was 45mm our new skirting is 119mm but the issue we have are the pipes for the radiators. They’re quite low down which is causing a problem with how high the new skirting is. How would we tackle this problem? Jigsaw the skirting to fit round the pipes? Or try and slot the skirting behind the pipes by removing the radiator temporarily?
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
{{ first(ask.errors)[0] }}
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year