Builders
Carpenters
Electricians
Flooring Specialists
Gardeners
Handymen
Heating Engineers
Painters & Decorators
Plasterers & Renderers
Plumbers
Roofers
Tilers
myFind Tradespeople, compare up to 3 quotes!
It's FREE and there are no obligations
How it works
Ask a trade
Cost guides
Categories
Natural stone cleaning
How do l clean exterior natural stone, it is very dirty and slightly green in places
Expert Trade Answers
"Hi there,
You can buy this product inexpensively, online.
Follow these steps :
Apply and evenly distribute Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface.
In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute.
Allow the product to work for approx. 15 minutes; brush occasionally.
Do not allow to dry; add water if necessary.
Brush again before wiping up. On large areas, use a squeegee to remove the product.
Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and
brushing more vigorously.
I hope it helps."
You can buy this product inexpensively, online.
Follow these steps :
Apply and evenly distribute Lithofin MN Power-Clean diluted up to 1:10 and wipe the surface.
In case of stubborn dirt deposits, apply undiluted or diluted up to 1:5 with a brush and distribute.
Allow the product to work for approx. 15 minutes; brush occasionally.
Do not allow to dry; add water if necessary.
Brush again before wiping up. On large areas, use a squeegee to remove the product.
Wash the surface thoroughly with clean water. If the result is not satisfying, repeat the process allowing the product to work longer and
brushing more vigorously.
I hope it helps."
Answered on 17th Aug 2021 - Member since Aug 2021 -
report
"Hi .. Clean stone surfaces with a neutral cleaner, stone soap, or a mild liquid dishwashing detergent and warm water. Similar to any item cleaned in your home, an excessive concentration of cleaner or soap may leave a film and cause streaks"
Answered on 19th Nov 2021 - Member since Aug 2020 -
report
"you can use a hot wash and then seal it with storm dry you will never have that problem again it's the best sealant for that I always use it and its amazing stuff but if the hot wash don't get it off there's a chemical you can use then you seal it after its been washed I hope that helps you"
Answered on 20th Nov 2021 - Member since Nov 2021 -
report
Related questions
Search other questions
Ask a Trade
Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.
Ask your question
Other categories
- Aerial Specialists
- Architects
- Bathroom Specialists
- Bricklayers
- Builders
- Joiners
- Cleaners
- Drainage Specialists
- Driveway Specialists
- Electricians
- Flooring Specialists
- Gardeners
- Handymen
- Heating Engineers
- Kitchen Fitters
- Locksmiths
- Loft Specialists
- Metalworkers
- Painters & Decorators
- Pest Controllers
- Plasterers
- Plumbers
- Removal Companies
- Roofers
- Security Specialists
- Specialists
- Stoneworkers
- Swimming Pool Specialists
- Tilers
- Traditional Craftsman
- Tree Surgeons
- Window Specialists
See all questions
Ask a Trade
Are you looking for advice on a DIY project or have a question for our tradespeople?
We'll email your question to tradespeople who are skilled in your chosen category.
Your question will be made public - please do not include any personal details.
{{ first(ask.errors)[0] }}
Report Content
{{ first(reportForm.errors) }}
Thank you
Your report has been created and will be investigated shortly.
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year