Final fit to fuse box

I have a garage that I have part converted to a room. I have fit 5 double sockets on a radial circuit using 4mm twin and earth and have a 32A fuse ready. How much would I be looking at for someone to fit the circuit and fuse to the fuse box and test?

Asked by Nathan on 13th Nov 2023
Expert Trade Answers
"Hi, depending where you are in the UK would vary on price with London being the most expensive. Rough ball park figure between £200-£250 outside of London."
Answered on 13th Nov 2023 - Member since Mar 2022 - report
"Well for it to get tested the electrician has to check the circuit wiring first to confirm that all the sockets and wiring has been done correctly before fitting it to thr fuse box."
Answered on 20th Dec 2023 - Member since May 2023 - report
"Where are you. If it’s just the one circuit to add to the board and test I would say around the £100 mark."
Answered on 13th Nov 2023 - Member since Jun 2023 - report
"Should be around £ 120 assuming the consumer unit is suitable

Kind regards"
Answered on 13th Nov 2023 - Member since Mar 2023 - report
"Hi there , the price will be £275 to fit 2 way rcbo fuse board with surge protection.But is there a feed for the fuse board in place , this will be an additional cost if there isn’t a feed in place."
Answered on 13th Nov 2023 - Member since May 2016 - report
"Hi I will connect it to ccu, second fix and test considered you have All materials for £120"
Answered on 13th Nov 2023 - Member since Sep 2023 - report
"Hello, how are you? Yes, this job can be easily done just for this four sockets. We have to use a ring circuit will be more safe and more power. This job will cost about £250. Thank you"
Answered on 13th Nov 2023 - Member since Nov 2023 - report
"Well I appreciate you have done the bulk of the work, but provided it's all good, and the run to the fuse board is relatively straightforward and test readings are fine £150 - £250"
Answered on 14th Nov 2023 - Member since Oct 2023 - report
"This install would cost from £600-800 with certificate."
Answered on 3rd Jan 2024 - Member since Mar 2022 - report
"Hi,

We would advise an estimate to be between 150.00-200.00 for connection of circuit and providing an accompanying electrical installation certificate.
All required standards would have to be met (eg Rcd protection, main protective earth bonding serving incoming utilities supplies.)"
Answered on 13th Nov 2023 - Member since Nov 2023 - report
Find Tradespeople, compare up to 3 quotes!
It's FREE and there are no obligations
Ask a Trade
Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.
Ask your question
Ask a Trade

Are you looking for advice on a DIY project or have a question for our tradespeople?

We'll email your question to tradespeople who are skilled in your chosen category.

Your question will be made public - please do not include any personal details.

{{ first(ask.errors)[0] }}

By continuing you agree to the Community Guidelines.

Report Content

{{ first(reportForm.errors) }}

Thank you

Your report has been created and will be investigated shortly.

Ready to get a price for your home improvement project?
Get started

Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year