Price for cutting kitchen worktops

Best Answer

"Depending on length, what material and how many cut outs for things like sinks, you're looking at around £150 to £400."

"It's a bit of an open ended question. £150 per corner for a laminate worktop but that's assuming that the kitchen walls are square which a lot aren't, they may look it but put a set square on and most aren't.
Then as said before, for sink I would put another £50 on. If the joiner is using quality bits in his router to get you a better finish the bit alone can be £50-60 and only good for two maybe three corners before it's blunt then another £10 for coloured glue and another £10-15 for bolts/clamps. The profit margin isn't great after everything else is added up (fuel, insurance, advertising) so if you don't want a rushed job be prepared to pay a little more."

"Hi, Thanks for asking, it's down to how many worktops plus if there is a sink to be cut out and a hob to be cut out.
You would be looking at around £250 as a close estimate.
Thanks."

"Hi there,
I usually charge about £85 per cut depending on the materials."

"Installation of the worktops could cost you around £300.00 for the labour."

"Providing its just normal work, to do this i would charge around £50 for sink & hob and £150 per Mason's mitre.
Regards,
Tony.
A G Hill Carpentry."

"Depends on how big the kitchen is and how many joints /sinks/hobs. Standard L shape would be around £100."

"Hi the price depends on how many cuts and what sort of work surface laminate,solid,timber
Regards
Paul"

"Depends on specifications and the material. Is it granite, timber etc? How many cuts and cut outs for sinks etc? Price will also depend on your location."

"The going rate for a mitre joint on a worktop is about £90"

"Normally for cutting kitchen work tops it ranges from £65 to £90 per joint. For a sick cut out would be £50 and a oven cut out would be £50."