MyJobQuote Logomyjobquote
  • Post a Job
  • Trade Signup
  • Ask a Trade
  • Cost Guides
  • About
  • Login
  • Ask a Tradesman

    hiring a heating engineer in Liverpool

    Heating Engineers

    I am based in Liverpool and I’d like to hire a heating engineer to sort out a radiator. Basically, the issue is that it's cold in different spots. How much will it likely cost to hire a professional to come out and fix this problem? Is it likely to be a small issue or might it be more serious? Any of your thoughts/advice on the matter would be greatly appreciated as the more I know/have in mind before hiring anyone, the easier everything could be.

    Asked by Cheryl on 14th Aug 2020
    Share this question
    Gas-Services

    "Hi
    I agree with Marc, if the radiators are old, even after power flushing won't clear out the sludge from the radiators as it jammed between fins. These days radiators are fairly cheap to buy if you shop around. This is the good time to sort out your heating problems. Good Luck!"

    Answered on 16th Aug 2020 - Member since Jan 2016 - report
    Redmond's Plumbers and Renovations

    "Heating Engineer on a day rate would do it for about £150 for day"

    Answered on 4th Sep 2020 - Member since May 2020 - report
    Mark BLACKBURN

    "If your radiator is really old it won’t clean or flush. It would be cheaper to buy a new radiator of the same size, as this will work out cheaper in the long run thanks"

    Answered on 14th Aug 2020 - Member since May 2019 - report
    Summerfield Services

    "It depends on the other radiators, if there ok then there could just be air in that one, if it is not air then there could be a blockage or sludge in the system, which may require some cleansing. If you have had the annual service then you should have been told, that it requires cleansing from time to time with chemicals If you have a combination boiler the pressure may be to low. I would charge £50 to come and have a look initially to my customers and if not repair there and the diagnosis will be made and the way forward."

    Answered on 14th Aug 2020 - Member since Jan 2020 - report
    MBD Builders & Heating Engineer

    "Is it an old system? If it is it's usually related to sludge in the system especially if you haven't got a magnatec filter. I would suggest getting the system flushed out. This will cost in the region of £300 to 400.

    MBDBuilders& Heating Engineers"

    Answered on 15th Aug 2020 - Member since Jun 2020 - report

    Ask a Trade

    Got a question that only a tradesperson can answer? We have thousands of trades ready to answer any question you may have.

    Ask your Question

    Related questions

    Ready to get a price for your home improvement project?

    get started
    x

    Report Content