I require two new column radiators fitted in my living room. The pipe work needs to be run into the room through the existing system as there is no pi...

Need to put 2 sockets/ room, 1 light/room, 1 radiator/room and fire and smoke detector/room. There are 2 rooms (3m×3m) and 1 bathroom..Probably 1 day...

put up a 120cm wall shelf on a plasterboard wall. I have the shelf and steel wall brackets, would like the handyman to supply fittings for plasterboa...

I require screed on a floor base inside my chimney the area is 29 X 15 inches

Remove and replace old fencing and garden gate. Currently aris rail but open to suggestions as long as any alternatives follow the shape of current f...

I require two new column radiators fitted in my living room. The pipe work needs to be run into the room through the existing system as there is no pi...

Need to put 2 sockets/ room, 1 light/room, 1 radiator/room and fire and smoke detector/room. There are 2 rooms (3m×3m) and 1 bathroom..Probably 1 day...

put up a 120cm wall shelf on a plasterboard wall. I have the shelf and steel wall brackets, would like the handyman to supply fittings for plasterboa...

I require screed on a floor base inside my chimney the area is 29 X 15 inches

Remove and replace old fencing and garden gate. Currently aris rail but open to suggestions as long as any alternatives follow the shape of current f...

I need 1. Gas safety certificates 2. Portable Appliance Testing (PAT) reports 3. EICR (Part P BS7671)

The job is to reboard and skim just the ceilings up to the cornice edge. Area approx 4x5m. It is about 3.2 m high.

LPG BOILER SERVICE AND ANUAL INSPECTION

Reconnect gas fire, materials required 8" of copper pipe at approx 1/2 inch and connectors to connect to existing pipes .

Install new light switch in bedroom

I need 1. Gas safety certificates 2. Portable Appliance Testing (PAT) reports 3. EICR (Part P BS7671)

The job is to reboard and skim just the ceilings up to the cornice edge. Area approx 4x5m. It is about 3.2 m high.

LPG BOILER SERVICE AND ANUAL INSPECTION

Reconnect gas fire, materials required 8" of copper pipe at approx 1/2 inch and connectors to connect to existing pipes .

Install new light switch in bedroom

I have 7 oak fire doors new with key locks all supplied

Bed bugs 1 room in a 4 bedroom house Also for fojr bedrooms

Large beech tree to be thinned/reduced by 30% & re-shaped.

I need two 65 inch TV's with brackets out up on walls in a small flat. Both walls are free of debris & ready to be worked on. The walls are dry stud w...

12 m2 fiberglass or slated roof on the side return with a window for air circulation.

I have 7 oak fire doors new with key locks all supplied

Bed bugs 1 room in a 4 bedroom house Also for fojr bedrooms

Large beech tree to be thinned/reduced by 30% & re-shaped.

I need two 65 inch TV's with brackets out up on walls in a small flat. Both walls are free of debris & ready to be worked on. The walls are dry stud w...

12 m2 fiberglass or slated roof on the side return with a window for air circulation.

Dyson hoover needs fixing as makes noise and has burning smell

Please quote to fully fit one double-glazed front window to a terraced house, including removal of existing wooden single-glazed window and frame. Wou...

Stair light keeps tripping need to sealed Two sockets need checking New kitchen light installed And maybe two new outlets for plug sockets

Remove Internal wall between Kitchen & Living room. ( Non load bearing ) ( May be pipes to radiator behind )

1. 3m parapet 2. Carefully take off and remove loose render from parapet wall where needed. 3. Clean and prepared parapet wall ready for scratch coat...

Dyson hoover needs fixing as makes noise and has burning smell

Please quote to fully fit one double-glazed front window to a terraced house, including removal of existing wooden single-glazed window and frame. Wou...

Stair light keeps tripping need to sealed Two sockets need checking New kitchen light installed And maybe two new outlets for plug sockets

Remove Internal wall between Kitchen & Living room. ( Non load bearing ) ( May be pipes to radiator behind )

1. 3m parapet 2. Carefully take off and remove loose render from parapet wall where needed. 3. Clean and prepared parapet wall ready for scratch coat...