Fit new stair balustrade to existing stair

The stairs need looking at. There are a few which are very creaky and there is a lot of movement in them.

Replacing old for new staircase with no handrail. straight staircase with square at the top then 3 steps. if its possble just to replace the striaght...

Just need a hand rail suppling and fitting to staircase

Want to change staur balastrade but Not really sure what I want so need someone to give me ideas

Fit new stair balustrade to existing stair

The stairs need looking at. There are a few which are very creaky and there is a lot of movement in them.

Replacing old for new staircase with no handrail. straight staircase with square at the top then 3 steps. if its possble just to replace the striaght...

Just need a hand rail suppling and fitting to staircase

Want to change staur balastrade but Not really sure what I want so need someone to give me ideas

i need new stair handrails supplied and fitted to stairs area as existing ones were taken out due to having a stairlift fitted. the new one needs to b...

I have an open plan staircase in the living room. All the heat goes straight upstairs. I need recommendations of how to block it off on a tight budget...

I am looking for a professional joiner to remove the existing stair and landing balustrade and install a new pine balustrade kit which I have already...

I need a permanent staircase going from my first floor to the loft need someone to supply the stairs and fit ASAP

The old staircase is quite short. It is easy to fall down

i need new stair handrails supplied and fitted to stairs area as existing ones were taken out due to having a stairlift fitted. the new one needs to b...

I have an open plan staircase in the living room. All the heat goes straight upstairs. I need recommendations of how to block it off on a tight budget...

I am looking for a professional joiner to remove the existing stair and landing balustrade and install a new pine balustrade kit which I have already...

I need a permanent staircase going from my first floor to the loft need someone to supply the stairs and fit ASAP

The old staircase is quite short. It is easy to fall down

I need a balustrade, supplied and fitted to my stairs

Having a new stair bannister carpet to be removed replaced and altered.

It's a new build house 3years old there's a gap between the stairs and the wall it goes from the bottom of the stairs to the upstairs the gap is...

New spindles and sanding stair case. I have spindles already

I’m looking to replace my spindle Balustrade with a glass Balustrade. The width of the balustrade is 187cm wide x 90cm high

I need a balustrade, supplied and fitted to my stairs

Having a new stair bannister carpet to be removed replaced and altered.

It's a new build house 3years old there's a gap between the stairs and the wall it goes from the bottom of the stairs to the upstairs the gap is...

New spindles and sanding stair case. I have spindles already

I’m looking to replace my spindle Balustrade with a glass Balustrade. The width of the balustrade is 187cm wide x 90cm high

Lay a new 14 step straight stair runner , I have gripper tradesman to supply underlay. Sides of stairs have been painted.

Fit new post, rails, spindles and clad stringers.

I’d like more space for my feet on each step, but I want to keep my existing staircase if possible. Could you measure and tell me whether tread overla...

Repair/replace handrail, newel post, and spindles basic 32mm chamfered edge. After a medical emergency at home, the fire service had to cut out some o...

We need a landing boxed in a small job

Lay a new 14 step straight stair runner , I have gripper tradesman to supply underlay. Sides of stairs have been painted.

Fit new post, rails, spindles and clad stringers.

I’d like more space for my feet on each step, but I want to keep my existing staircase if possible. Could you measure and tell me whether tread overla...

Repair/replace handrail, newel post, and spindles basic 32mm chamfered edge. After a medical emergency at home, the fire service had to cut out some o...

We need a landing boxed in a small job