I have a 4ft gate in situ but want it higher Posts are already in place

Replace one existing post, add new panel (1 metre wide, 1.80 in height) and fix with new post. Tradesman supplies 2 posts and the fencing.

Replace 7 panels and garden gate, include removing old fence as well. Concerete pillars and replaceable wooden panels

A couple of meters fence to block the back of the garden as there’s a public walkway right next to it

Replace rotten fence panels 7 off standard 6ft panels plus 2 posts and 3 gravel boards. Plus some lattice panels for fruit growing which only need rem...

I have a 4ft gate in situ but want it higher Posts are already in place

Replace one existing post, add new panel (1 metre wide, 1.80 in height) and fix with new post. Tradesman supplies 2 posts and the fencing.

Replace 7 panels and garden gate, include removing old fence as well. Concerete pillars and replaceable wooden panels

A couple of meters fence to block the back of the garden as there’s a public walkway right next to it

Replace rotten fence panels 7 off standard 6ft panels plus 2 posts and 3 gravel boards. Plus some lattice panels for fruit growing which only need rem...

We need 6 posts and 5 panels fitted with a new gate. All wood.

Replace some fence posts. Considering concrete. Would like to compare costs

10 fence panels with concrete posts and concrete plinth

Need to replace old and rotten post & rail wooden fencing with stock fencing. About 300 feet in total running between horse paddock and garden. Would...

I need someone to make a leaf for a gate for me.I have the motor already. Wood preferably and to be quite affordable.

We need 6 posts and 5 panels fitted with a new gate. All wood.

Replace some fence posts. Considering concrete. Would like to compare costs

10 fence panels with concrete posts and concrete plinth

Need to replace old and rotten post & rail wooden fencing with stock fencing. About 300 feet in total running between horse paddock and garden. Would...

I need someone to make a leaf for a gate for me.I have the motor already. Wood preferably and to be quite affordable.

Driveway 2.3m span covered by two gates approximately 1.8m high. Left side attaches to brick pillar in poor condition. Right side attaches to a concre...

Wooden 6ft fence approximately 18m on one side to match other side.

14 fence panels need renewing. Current concrete posts in place. May need new fence panel base (concrete or wood). Fence panel material to be decided....

Remove and replace 7 fence panels and fit concrete gravel boards.

I want someone to come and look at the job required to give me a written quote for composite, slated fence between properties (no wall for this to sit...

Driveway 2.3m span covered by two gates approximately 1.8m high. Left side attaches to brick pillar in poor condition. Right side attaches to a concre...

Wooden 6ft fence approximately 18m on one side to match other side.

14 fence panels need renewing. Current concrete posts in place. May need new fence panel base (concrete or wood). Fence panel material to be decided....

Remove and replace 7 fence panels and fit concrete gravel boards.

I want someone to come and look at the job required to give me a written quote for composite, slated fence between properties (no wall for this to sit...

? “Hi, I’m looking to have horizontal timber slats fixed over an existing brick garden wall (approx 7 metres long, and about 6 foot high I’m after a...

One panel and 2 posts with one metal gate. 5' x4' panel OK, but 3" square wooden 6' posts have rotted. Post for gate could be replaced too. Gate is so...

The fence needs to be 5 metres in length and 5ft high.

Looking for one wooden fence post to be replaced. Currently leaning, appears to have rotted

Hi we need below two works done(either one is ok): 1. We want to relocate our existing side gate door which is 2.8m width backward about 5 meters. 2....

? “Hi, I’m looking to have horizontal timber slats fixed over an existing brick garden wall (approx 7 metres long, and about 6 foot high I’m after a...

One panel and 2 posts with one metal gate. 5' x4' panel OK, but 3" square wooden 6' posts have rotted. Post for gate could be replaced too. Gate is so...

The fence needs to be 5 metres in length and 5ft high.

Looking for one wooden fence post to be replaced. Currently leaning, appears to have rotted

Hi we need below two works done(either one is ok): 1. We want to relocate our existing side gate door which is 2.8m width backward about 5 meters. 2....