Transform Various Rooms with Coving!
Tell us about the work you need doing around your home.
Up to 3 local trades will then be in touch to quote for the work.
Compare quotes then choose your preferred tradesman.
If you've purchased standard plaster coving to transform your living room and you plan on doing a DIY job, then you will need to ensure you have the correct tools and equipment. You will require a plastic mitre block designed for cutting coving with the internal and external mitre cuts marked out, a saw for cutting the coving, a pointing or gauging trowel or spatula for the adhesive and filler, coving adhesive, screws for holding the coving in place until the adhesive dries, a pencil for marking out, plus a tape measure. Before you begin, protect your floor or carpet, as cutting plaster coving can be messy. Fitting plaster coving can be awkward on your own, so it may help to have another person assist you, especially in a large room with long runs of coving. Pick a starting point and make the correct cut using the mitre block, then measure the wall to determine the length required for the next piece. Repeat this process for all runs of coving, then fix them in place using coving adhesive and, where required, screws to hold the coving until the adhesive sets. As you work your way around the room, fill any screw holes or small gaps with coving adhesive and clean off excess with your trowel or spatula.
It can sometimes be difficult to find a plasterer at short notice, particularly if local tradespeople are already booked up. Rather than choosing someone based on a directory listing alone, compare a few local plasterers and look at customer feedback and examples of previous work where available. You can also ask friends, family or neighbours whether they have used a plasterer for similar work and whether they would hire them again. If personal recommendations are not available, you can use the free quote service on this website. It is completely free and takes just a couple of minutes. Simply click the "post your job" button to get started.
Before hiring, check that the plasterer has suitable insurance and ask for a written quotation with a detailed breakdown of costs. You can also ask to see examples of previous coving work and confirm what is included in the price. Labour rates for standard coving installation may start from around £25-£30 per hour.
We had the back of the house rendered last week and fine cracks have appeared across it as it has dried. The renderer sa...
The render on our gable end takes a battering from the rain and never seems to dry out. What do installers charge for we...
We've just bought a place with artex on every ceiling and I can't stand it. Is it a case of scraping it off or getting i...
We had a leaking gutter for months and the brickwork on that side got soaked right through. Now it's fixed, how long bef...
The tyrolean on the front of our house is cracked and blown in a couple of spots, we're thinking of having the whole lot...
I keep seeing cork render recommended for older solid wall houses because it breathes. How does the cost per square metr...
Over 1 million homeowners and over 50,000 tradespeople
use MyJobQuote nationwide each year