Extend and convert existing wooden outbuilding,

An 8m x 5m outbuilding. 2.5m to eves. Brick and block. Roller garage door, large window and pedestrian door on 8m aspect. Site is less than 2m fr...

Construct a two storey house approx 100m and including all trades

5m wide x 8m long x 3m high an outbuilding house in back garden and all utilities need to be taken from the main house which is 30m away along with ac...

Outhouse door bricked up and knock through to my small hallway to make it a bit bigger

Extend and convert existing wooden outbuilding,

An 8m x 5m outbuilding. 2.5m to eves. Brick and block. Roller garage door, large window and pedestrian door on 8m aspect. Site is less than 2m fr...

Construct a two storey house approx 100m and including all trades

5m wide x 8m long x 3m high an outbuilding house in back garden and all utilities need to be taken from the main house which is 30m away along with ac...

Outhouse door bricked up and knock through to my small hallway to make it a bit bigger

I need a storage maximum 2.5m tall, I don't know the measurements but is a place like two motorbikes standing next to each other visualise

Looking to extend side of house to add roughly 6 sq m of space - extension would come off side of house (kitchen with outside door) & sit against back...

Side extension to a garage of block and brick construction consisting of rear wall @ 1.8 metres and side wall @ 5.5 metres, footings on solid stable g...

remove existing shed and construct new office studio in garden

Construct a 4 bedroom house with all trades included.

I need a storage maximum 2.5m tall, I don't know the measurements but is a place like two motorbikes standing next to each other visualise

Looking to extend side of house to add roughly 6 sq m of space - extension would come off side of house (kitchen with outside door) & sit against back...

Side extension to a garage of block and brick construction consisting of rear wall @ 1.8 metres and side wall @ 5.5 metres, footings on solid stable g...

remove existing shed and construct new office studio in garden

Construct a 4 bedroom house with all trades included.

To remove an existing external canopy over a side entrance and replace with new canopy cover ; update and replace existing external lights

To remove an existing external canopy over a side entrance and replace with new canopy cover ; update and replace existing external lights

Build a single garage next to property, preferably using the same/similar materials to the house (stone and wooden cladding) pitch roof.

Build a double garage with a flat roof, block and render, full approved plans available.

To remove an existing external canopy over a side entrance and replace with new canopy cover ; update and replace existing external lights

To remove an existing external canopy over a side entrance and replace with new canopy cover ; update and replace existing external lights

To remove an existing external canopy over a side entrance and replace with new canopy cover ; update and replace existing external lights

Build a single garage next to property, preferably using the same/similar materials to the house (stone and wooden cladding) pitch roof.

Build a double garage with a flat roof, block and render, full approved plans available.

To remove an existing external canopy over a side entrance and replace with new canopy cover ; update and replace existing external lights

It's for a workshop. This does not need foundations as these have already been laid using no more dig piles and the platform for the building to go on...

Tapered garage. 6m front width, 9m long sides and 1.5m rear width.

To have a shed, mostly corrugated iron, demolished and removed, approx 20ft by 8ft, and replaced with a smaller building such as a summer house o...

build a prefab garage 4.5ft w, 10ft d, auto roller door on front, personal door rear right, 1 window on rear, concrete pad will be in place already

To replace an existing retractable canopy on a side entrance with a fibreglass over-door canopy ; and update existing light fittings

It's for a workshop. This does not need foundations as these have already been laid using no more dig piles and the platform for the building to go on...

Tapered garage. 6m front width, 9m long sides and 1.5m rear width.

To have a shed, mostly corrugated iron, demolished and removed, approx 20ft by 8ft, and replaced with a smaller building such as a summer house o...

build a prefab garage 4.5ft w, 10ft d, auto roller door on front, personal door rear right, 1 window on rear, concrete pad will be in place already

To replace an existing retractable canopy on a side entrance with a fibreglass over-door canopy ; and update existing light fittings